Find Your Exact 24" Chain

Two ways to land on the precise chain for your saw. Pick the one that matches what you know:

Not sure either way? Send a photo of your bar stamp through the chat bubble on screen and our team will confirm your exact chain before you order, our Guaranteed Fit system.

Why "24-Inch Chain" Isn't a Single Size

At 24 inches you're running a large professional saw — the pitch is full 3/8" and the count is almost always 84. But the gauge still varies, and that's what has to match. Three things decide your chain:

• Drive links (DL): the number of teeth on the underside of the chain that sit in the bar groove. A 24" bar typically takes 84 drive links. Confirm it against your bar stamp or old chain to be sure.
• Pitch: the distance between drive links. At 24" this is full 3/8" — the professional standard. It has to match your saw's drive sprocket exactly.
• Gauge: the thickness of the drive links, in .050", .058" or .063". It has to match the width of your bar groove exactly. In Australia, many Stihl saws run a .063" gauge where other markets use .050" — so always confirm rather than assume.

Get all three right and the chain runs true. Get the gauge wrong and it either won't seat in the groove, or it'll run loose and wear out fast — which matters even more on a big saw doing long cuts. That's why we match on the full specification instead of bar length.

How to Read Your Bar Stamp

On most bars, the numbers are stamped into the flat metal near the mounting slot, close to where the bar meets the saw body. You're looking for:

1. The pitch — on a 24" bar, almost always 3/8".
2. The gauge — often shown as .050", .058", .063", or in mm (1.3mm, 1.5mm, 1.6mm). This is the critical one at this length.
3. The drive-link count — typically 84; sometimes stamped, otherwise count the drive links on your old chain.

Can't read them, or the bar's too worn? That's what the Search by Chainsaw option and our chat verification are for. Don't guess — a two-minute check saves ordering the wrong chain.

24" Chains by Brand

Know your brand? Jump straight to chains for the most common saws that run a 24-inch bar in Australia:

• Stihl 24" chains — MS 441, MS 461, MS 462, MS 500i, MS 660, MS 661 and more
• Husqvarna 24" chains — 372 XP, 385 XP, 390 XP, 394 XP, 395 XP, 572 XP, 592 XP and more
• Echo 24" chains — CS-680 and more

24-Inch Chainsaw Chain — Common Questions

What size chain fits a 24-inch bar?

A 24" bar takes a 3/8" pitch chain, typically 84 drive links, in a gauge that matches your bar — .050", .058" or .063". The bar length and drive-link count alone don't identify the chain; the gauge has to match too. Use your bar stamp or saw model to find the exact one.

How many drive links is a 24-inch chainsaw chain?

Almost always 84 drive links, since 24" bars run full 3/8" pitch. Always confirm by reading your bar stamp or counting the drive links on your current chain.

What gauge is a 24-inch chainsaw chain?

It varies — .050", .058" and .063" are all used on 24" bars depending on the saw. In Australia, many Stihl saws run .063" where other markets use .050". This is the spec most worth double-checking at this length, because the wrong gauge won't fit the bar groove correctly.

How do I find my gauge?

It's usually stamped on the side of your guide bar near the mounting bolts, shown as .050"/.058"/.063" or in millimetres. If it's worn off, enter your saw's make and model in our Search by Chainsaw tool, or send a photo of your bar through the chat and we'll identify it for you.

What if I order the wrong chain?

You're covered. Every Alpine Chain Co. chain is backed by our Guaranteed Fit promise — send us a photo of your bar stamp before we ship and we'll confirm the fit, and if a chain we send doesn't fit your saw, we'll replace it with the correct one free of charge.